Temperature at 128°C

[ernie95]

Hi All,

Thanks for this very useful tool.

I installed it on my proxmox node.

All is fine exept that the temeprature disk is at 128°C (max temperature) in the overview for the node part.

But sensors command show :

`oot@pve:/etc/ssh# sensors
power_meter-acpi-0
Adapter: ACPI interface
power1: N/A (interval = 1.00 s)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +36.0°C (high = +90.0°C, crit = +100.0°C)
Core 0: +36.0°C (high = +90.0°C, crit = +100.0°C)
Core 1: +33.0°C (high = +90.0°C, crit = +100.0°C)
Core 2: +33.0°C (high = +90.0°C, crit = +100.0°C)
Core 3: +34.0°C (high = +90.0°C, crit = +100.0°C)
Core 4: +32.0°C (high = +90.0°C, crit = +100.0°C)
Core 5: +33.0°C (high = +90.0°C, crit = +100.0°C)

nvme-pci-0d00
Adapter: PCI adapter
Composite: +30.9°C (low = -20.1°C, high = +74.8°C)
(crit = +79.8°C)

acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8°C

nct6798-isa-0a10
Adapter: ISA adapter
in0: 856.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.36 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 2.04 V (min = +0.00 V, max = +0.00 V)
in6: 0.00 V (min = +0.00 V, max = +0.00 V)
in7: 3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.18 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 1.20 V (min = +0.00 V, max = +0.00 V) ALARM
in11: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.70 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in14: 2.04 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 433 RPM (min = 0 RPM)
fan2: 576 RPM (min = 0 RPM)
fan3: 392 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 0 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
SYSTIN: +56.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +97.0°C) sensor = thermistor
CPUTIN: +127.5°C (high = +80.0°C, hyst = +75.0°C) ALARM
(crit = +97.0°C) sensor = thermistor
AUXTIN0: -128.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +97.0°C) sensor = thermistor
AUXTIN1: +16.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +97.0°C) sensor = thermistor
AUXTIN2: +23.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +97.0°C) sensor = thermistor
AUXTIN3: -62.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +97.0°C) sensor = thermistor
AUXTIN4: -62.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +97.0°C)
PECI Agent 0: +34.0°C (high = +80.0°C, hyst = +75.0°C)
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
pwm1: 26% (mode = pwm)
pwm2: 26% (mode = pwm)
pwm3: 26% (mode = pwm)
pwm4: 26% (mode = pwm)
pwm5: 26% (mode = pwm)
pwm6: 26% (mode = pwm)
pwm7: 26% (mode = pwm)
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled

nvme-pci-0a00
Adapter: PCI adapter
Composite: +31.9°C (low = -20.1°C, high = +74.8°C)
(crit = +79.8°C)`

How can I have the rigth temperature ?

Thanks